幸运时时彩

关于我们
当前位置: 首 页 > 液体计量Liquid metering >
液体计量Liquid metering

液体计量Liquid metering

  • 所属分类:液体计量Liquid metering
  • 发布日期:2019-07-31
  • 产品概述
  • 性能特点
  • 技术参数

液体定量计量控制器系统是由计量装置与配套管线组成。计量装置包括:流量变送器、过滤器、平衡逆止阀、温度传感器(ρt100铂电阻)、流量计量仪(二次仪表)、油枪单向阀、油枪、耐油软管。配套管线包括:阀门、前后直管段、泵、平衡管。

系统采用先进的温度跟踪、密度补偿的计量方法,确保液体的罐装计量过程中由于温度变化造成的计量误差,精度始终控制的千分之二以内。该系统凭借其低廉的价格、       稳定的性能、快捷简便的灌装过程。并且该设备可根据客户的要求为您量身定做、可增加防腐防爆功能。

The liquid quantitative metering controller system is composed of metering device and supporting pipeline. The metering device includes: flow transmitter, filter, balance check valve, temperature sensor (rho T100 platinum resistance), flow meter (secondary instrument), oil gun one-way valve, oil gun, oil resistant hose. The supporting pipelines include valves, front and rear straight sections, pumps and balancing pipes.

The system adopts advanced measurement methods of temperature tracking and density compensation to ensure that the measurement errors caused by temperature changes in the process of measuring liquid cans are within two thousandths of the accuracy controlled from beginning to end。 The system relies on its low price, stable performance, fast and simple filling process。 And the equipment can be tailor-made for you according to the requirements of customers, and can increase the anti-corrosion and explosion-proof function。



自动计量系统

自动计量系统

自动计量系统

自动计量系统

液体定量计量控制器简要工作流程:   

1、 把桶摆好位置(可成排放置,方便灌装);

2、 从液体定量计量控制仪表上直接输入液料的定量灌装公斤数和桶数;

3、 把油枪插到桶里,启动仪表开始计量灌装大桶;

4、 由控制仪表发出控制指令,打开相关阀门、泵,开始付料计量;

5、 在即将达到预设值时关掉相关阀门、泵;

6、 换第二桶,把油枪插到桶里,依照上面3、4、5、的步骤灌装,直至完成全部大桶的灌装。

7、灌装付料计量结束,控制仪表内置打印机打印出付料结果(包含:公斤数、年、月、日、时、分、仪表内有时钟功能)。

上述工作过程为自动灌装过程,由控制仪表自动控制完成,灌装时可通过按遥控器或仪表按键启动仪表。

Brief Workflow of Liquid Quantitative Metering Controller:

1. Put the barrel in a good position (it can be used as a discharge device to facilitate filling);

2. Quantitative filling kilograms and barrels of liquid materials are fed directly from the liquid quantitative metering control instrument.

3。 Insert the oil gun into the barrel and start the meter to measure and fill the barrel。

4. Control instructions are issued by the control instrument, relevant valves and pumps are opened, and metering of materials is started.

5. Turn off the relevant valves and pumps when the preset value is about to be reached.

6. Change the second barrel and insert the oil gun into the barrel. Fill the barrel according to the steps of 3, 4, 5 above until the whole barrel is filled.

幸运时时彩7. At the end of filling and charging metering, the control instrument built-in printer prints out the results of filling (including: kilograms, years, months, days, hours, minutes, clock functions in the instrument).

幸运时时彩The above work process is an automatic filling process, which is automatically controlled by the control instrument. The instrument can be started by pressing the remote control or the instrument key.




上一篇:没有了
下一篇:没有了

最近浏览:

幸运时时彩开奖记录 大地棋牌官网 幸运时时彩 幸运时时彩官网 秒速时时彩 吉林快3 幸运时时彩开奖结果 幸运时时彩 幸运时时彩 幸运时时彩